Biomes - Step-by-Step Instructions

Step-by-Step Instructions

  1. Place a 1-inch (2.5-centimeter) layer of gravel on the bottom of the fish tank.
  2. Place a 1-inch (2.5-centimeter) layer of sand over the gravel.
  3. Mix 2 parts of topsoil to 1 part of sand. Place a 2- to 3-inch (5- to 7.5-centimeter) layer of the sand/topsoil mixture over the sand layer.
  4. Plant 4 to 6 trees. Be sure to cover all the roots. If seeds are being used, place them 1 inch (2.5 centimeters) down in the soil and allow 1 month for them to sprout.
  5. Place the thermometer inside the terrarium against the back wall.
  6. Water gently until approximately 0.25 inch (0.6 centimeter) of water has accumulated in the gravel layer.
  7. Place the fish tank outside or in a sunny place indoors. You must maintain the temperature of the fish tank in the range of 32 to 60°F (0 to 15°C). If you need to provide artificial light, place the incandescent fixture above...

[The entire page is 209 words long]

Join eNotes

The above is a free excerpt. Get total access to this content with the:

eNotes Pass